ShiAo ,LangRong Road,DaLang,LongHua District,ShenZhen,China
GYXTW
Description
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking materialis applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath。
Characteristics
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Crush resistance and flexibility
PSP enhancing moisture-proof
Two parallel steel wires ensure tensile strength
Small diameter, light weight and friendly installation
Long delivery length
Cable Parameters
Options
Fiber Type: G652, G655 or G657 single-mode fiber, A1a or A1b multi-mode fiber, or other types of fiber;
Cable Dimension: The nominal cable dimension, or other contracted dimension;
Delivery Length: 1km or 2km, or other contracted length;
Other Requirements: Other contracted special requests
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking materialis applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath。
Characteristics
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Crush resistance and flexibility
PSP enhancing moisture-proof
Two parallel steel wires ensure tensile strength
Small diameter, light weight and friendly installation
Long delivery length
Cable Parameters
| Fiber Count | Cable Dimension （mm） |
Cable Weight （kg/km） |
Tensile （N） |
Crush （N/100mm） |
Min. Bend Radius （mm） |
Range of Temperature （℃） |
|||
| Long Term | Short Term | Long Term | Short Term | Dynamic | Static | ||||
| 2 | 8.3 | 78 | 600 | 1500 | 300 | 1000 | 20D | 10D | -40～+60 |
| 4 | 8.3 | 78 | 600 | 1500 | 300 | 1000 | |||
| 6 | 8.3 | 78 | 600 | 1500 | 300 | 1000 | |||
| 8 | 8.3 | 78 | 600 | 1500 | 300 | 1000 | |||
| 12 | 8.3 | 78 | 600 | 1500 | 300 | 1000 | |||
| Note: 1 All the values in the table, which are for reference only, are subject to change without notice; 2 The minimum bend radius (static) is 5H when G657 fiber is used. |
|||||||||
Options
Fiber Type: G652, G655 or G657 single-mode fiber, A1a or A1b multi-mode fiber, or other types of fiber;
Cable Dimension: The nominal cable dimension, or other contracted dimension;
Delivery Length: 1km or 2km, or other contracted length;
Other Requirements: Other contracted special requests